Replacement Double Glazing Window Handles
When a double-glazed window handle is damaged, it's important to get a replacement that is safe and functional.
uPVC handles work on the spindle, which runs through the centre of the handle, and then into the lock mechanism in the window frame.
The step height of a uPVC handle is determined by looking at the screw cover caps located on the inside of the handle.
Tilt & Turn
Tilt and turn windows are a popular option in Europe however they have only recently made an impact here in the UK. The advanced functionality of these windows makes them an excellent option for new constructions and renovation projects. They are easy to open or close which allows light and air into your home.
The locking points on the sash, and the rubber seal that runs across the entire frame's perimeter ensure that they are more airtight than other types of windows. In contrast to uPVC Casement Windows that tilt and turn are able to be opened from both the top and bottom. This allows you to clean your windows on the outside from the at-home comforts of your home.
If you are replacing a tilt and turn window handle it is essential to think about the step height of your handle. This is the distance from the base of the handle to where it is attached to the frame of the window. It is vital to do this correctly since if you don't, your window will not be able to open properly.
The normal step height for a UPVC or aluminium tilt and turn window is 21mm. Make sure that the handle you choose has this same height so that it fits in your existing window.
When you are choosing a replacement tilt and turn window handle you should also consider the kind of operation. Some handles come with an opening lever that is locked and then lowered and up at 90 degrees to tilt, and straight up to open. This is known as a "tilt before turn" (TBT) safe handle and you should always make use of this when children are in your home.
The majority of tilt and turn windows will feature a spindle on the handle's back that can be adjusted to different positions, similar to the door lock. The length of the spindle is also different. Some have a longer spindle, and this can be adjusted by using an screwdriver to move the shaft up or down. Some have a shorter shaft that can only be adjusted by loosening the small screw at base of handle.
Casement
Casement windows are extremely popular due to a variety of reasons. Its basic design makes it easy to put up and also provides great energy efficiency and noise isolation. There are a few common problems with these windows. Homeowners should be aware of them. If the handle on your casement breaks it could be difficult to open the windows.
There are simple steps you can follow to replace your window handle and get it working again. Follow these steps regardless of whether your casement window was installed recently or is a few years old.
If your uPVC casement window has broken, it is important to fix it as quickly as you can. door handles will help keep your home secure and deter burglars. There are several options for replacing your window handle, including the cockspur handle and espag handles. However, it is important to choose the right handle for your window. If you're having difficulty opening your window, it is likely that the spindle within the handle has worn out.
There are a few important aspects to take into consideration when replacing the handles on your uPVC window casement. This includes the size of the handle, the screw centres, and the size of the spindle. You should also think about the lock's design and colour. This is because the mechanism that locks your window will be contingent on the kind of handle you choose.
Today's uPVC windows have Espag handles. These handles are used to operate your uPVC window's espagnolette multipoint lock. The handles are available in various colors and in locking or unlocking versions. They are also available in left and right opening styles.
Cockspur handles can be present on older uPVC double-glazed windows but are not used anymore. They differ from the aluminum equivalents in that they have an additional step height. They are typically 21mm, in contrast to the aluminium version, which is 9mm.
You can also use blade or spade handles to replace handles for double-glazed windows. These handles are similar in design to cockspur handles, but they have a smaller spindle. They are often used on older wooden frame double glazed windows, but they could also be found on uPVC cottage windows.
Sash
If you have an old sash window, you might need to replace the handles. This is because windows of this type typically have a system that includes the counterweight, sash cord, pulley and rails which together allow the sash to move up and down easily. The movement of the sash can prevent moisture from entering the frame and cause wood rot or mould, as well as allowing the window to open to let fresh air in.
You'll need to measure the spindle of your sash windows in order to find the right handle. This can be determined by looking at the back of the handle's base, and determining the distance it extends into the frame. It is also important to consider the window's hand, i.e. whether the handle opens anti-clockwise (right-handed) or clockwise (left-handed).
After you have chosen the appropriate sash handles for your window, you'll need to determine if you'll need tilt latch. A tilt latch is used to ensure that the window is upright and can be put in on single or double-glazed windows. They're available in three kinds: internal tilt latches, slide-in tilt latches and tilt latches that are mounted on the surface.
For added security, have a sash lock fitted to your windows sash. This will secure the opening of your window and stop it from being forced open by burglars.
There are many different designs of sash handles that you can pick from with Espag handle designs being the most common for uPVC windows. These are typically round and slim, with a locking mechanism. There are also monkey tail and cockspur handles. These are better suited to traditional windows and have an attractive look. However they can also be found on casement windows.
Vertical Sliding
Vertical sliding windows are the best choice for smaller rooms. While horizontal sliding window are popular for large openings, they're also a good option for larger ones. These windows are easy to clean and offer excellent ventilation. They don't require any maintenance, which means they are more affordable than the alternatives. They could be damaged in the event that you accidentally move the windows. It is important that these windows are installed in a spot where pets and children are not able to get to them.
Vertical sliding windows by moving the frame left or right. The spiral balance is typically comprised of a strip of metal that is protruding from the window on one side and twisted into a coiled shape. When the window is opened to the ground, the hidden portion of the spiral rotates to allow the sash to be lifted and closed.
The most common type of vertical sliding windows is made from real timber, which gives your home a classic style. If you prefer a more modern style, PVC-U can be found in a range of colors and finishes to suit your taste. Some manufacturers also offer woodgrain-like finishes for a more authentic appearance.
Vertical sliding windows are simpler to open than double-hung windows in some circumstances. They are also less vulnerable to moisture damage than wooden windows, making them a great option for homes with seniors or children.
Certain homeowners add security features to their sliding windows, which helps keep unwanted guests away from the home. To do this, you can wedge the scrap piece of wood into the lower sash. You can then secure it onto the frame to keep it from opening completely. If you're looking for something more sophisticated think about installing a keyed sliding-bolt lock to the frame. This will give you peace of mind that your windows are safe and your family will be able gain access to them in the event of an emergency.